Sale!

API Std 608

$129.00 $64.50

Metal Ball Valves – Flanged, Threaded, and Welding Ends, Sixth Edition
standard by American Petroleum Institute, 01/01/2020

Category:

Description

Specifies the requirements for metal ball valves suitable for petroleum, petrochemical, and industrial applications that have butt-welding or flanged ends for NPS 1/2 through NPS 24 and threaded or socket-welding ends for NPS 1/4 through NPS 2, corresponding to the nominal pipe sizes in ASME B36.10M. Also applies to metal ball valves in pressure classes 150, 300, and 600 for flanged ends and in pressure classes 150, 300, 600, and 800 for socket-welding, butt-welding, and threaded ends. Establishes requirements for bore sizes described as full bore, single reduced bore, and double reduced bore. Covers additional requirements for ball valves that are otherwise in full conformance to the requirements of ASME B16.34, Standard Class.

Product Details

Edition:
6th
Published:
01/01/2020
Number of Pages:
32
File Size:
1 file , 1000 KB
Redline File Size:
2 files , 5.1 MB
Product Code(s):
C60806, C60806, C60806, C60806, C60806
Note:
This product is unavailable in Cuba, Iran, North Korea, Syria
Sale!

API Std 608

$112.00 $56.00

Metal Ball Valves-Flanged, Threaded and Welding Ends, Fifth Edition
standard by American Petroleum Institute, 11/01/2012

Category:

Description

Please note that the API Monogram Program effective date for the this document’s next edition is July 2020. Until then, this edition will still be considered active and not historical.

This standard specifies the requirements for metal ball valves suitable for petroleum, petrochemical, and industrial applications that have:

  • flanged ends in sizes DN 15 through DN 600 (NPS 1/2 through NPS 24);
  • butt-welding ends in sizes DN 15 through DN 600 (NPS 1/2 through NPS 24);
  • socket-welding ends in sizes DN 8 through DN 50 (NPS 1/4 through NPS 2);
  • threaded ends in sizes DN 8 through DN 50 (NPS 1/4 through NPS 2).

Corresponding to the nominal pipe sizes in ASME B36.10M.

This standard applies to metal ball valves with pressure classes as follows:

  • flanged ends in Classes 150, 300, and 600;
  • butt-welding ends in Classes 150, 300, and 600;
  • socket-welding ends in Classes 150, 300, 600, and 800;
  • threaded ends in Classes 150, 300, 600, and 800.

This standard establishes requirements for bore sizes described as:

  • full bore;
  • single reduced bore;
  • double reduced bore.

This standard applies to floating (seat-supported) ball (Figure B.1) and trunnion ball valve designs (Figure B.2). These figures are to be used only for the purpose of establishing standard nomenclature for valve components – other floating and trunnion designs also exist.This standard establishes additional requirements for ball valves that are otherwise in full conformance to the requirements of ASME B16.34, Standard Class.

Product Details

Edition:
5th
Published:
11/01/2012
Number of Pages:
28
File Size:
1 file , 480 KB
Redline File Size:
2 files , 5 MB
Product Code(s):
C60805, C60805, C60805, C60805, C60805, C60805, C60805, C60805, C60805
Note:
This product is unavailable in Cuba, Iran, North Korea, Syria
Sale!

API Std 608

$133.00 $66.50

Metal Ball Valves-Flanged, Threaded and Welding Ends, Fourth Edition
standard by American Petroleum Institute, 12/01/2008

Category:

Description

This standard specifies the requirements for metal ball valves suitable for petroleum, petrochemical and industrial applications that have:

  • flanged ends in sizes NPS 1/2 through NPS 20 (DN15 through DN500);
  • butt-welding ends in sizes NPS 1/2 through NPS 20 (DN15 through DN500);
  • socket-welding ends in sizes NPS 1/4 through NPS 2 (DN8 through DN50);
  • threaded ends in sizes NPS 1/4 through NPS 2 (DN8 through DN50).

Corresponding to the nominal pipe sizes in ASME B36.10M.

This standard applies to metal ball valves with pressure classes as follows:

  • flanged ends in Classes 150, 300 and 600 (PN16, 25, 40 and 100);
  • butt-welding ends in Classes 150, 300 and 600 (PN16, 25, 40 and 100);
  • socket-welding ends in Classes 150, 300, 600 and 800 (PN16, 25, 40 and 100);
  • threaded ends in Classes 150, 300, 600 and 800 (PN16, 25, 40 and 100).

This standard establishes requirements for bore sizes described as:

  • full bore;
  • single reduced bore;
  • double reduced bore.

This standard applies to floating ball valve designs and trunnion ball valve designs. These figures are to be used only for the purpose of establishing standard nomenclature for valve components- other floating and trunnion designs also exist.

This standard establishes additional requirements for ball valves that are otherwise in full conformance to the requirements of ASME B16.34, Standard Class.

Product Details

Published:
12/01/2008
ANSI:
ANSI Approved
Number of Pages:
17
File Size:
1 file , 460 KB
Redline File Size:
2 files , 850 KB
Product Code(s):
C60804, C60804, C60804, C60804, C60804, C60804
Note:
This product is unavailable in Cuba, Iran, North Korea, Syria
Sale!

API Std 608

$133.00 $66.50

Metal Ball Valves – Flanged and Butt-Welding Ends
standard by American Petroleum Institute, 08/01/2002

Category:

Description

Covers Class 150 and Class 300 metal ball valves that have either butt-welding or flanged ends and are for use in on-off service.

Product Details

Edition:
3rd
Published:
08/01/2002
ANSI:
ANSI Approved
Number of Pages:
20
File Size:
1 file , 280 KB
Product Code(s):
C60803R, C60803, C60803, C60803R, C60803, C60803R
Note:
This product is unavailable in Cuba, Iran, North Korea, Syria